The isopropyl alcohol or isopropanol, which is the most common cleaner, used for fiber optics, is perfectly adapted to this operation because it cleans efficiently, carefully and without damaging the optical fiber. It dries quickly, without leaving any residues.
It is available in 0.25L, 1L and 5L.
It is packed in bottle and plastic can to enable an easy and practical use.
It is also possible to recondition them in smaller packing.
Safety cap + dropper on the 1L – bottle.
Especially developed for the cleaning of some very resistant contaminants such as gels or lubricants, the Cleanoptic degreaser is very efficient and dries very quickly on the fibre optics.
It is available in 1L and 5L – large opening on the 1L can to enable to plunge the cable directly in the bottle.
The two CLEANOPTIC solvents can be conditioned on demand into a broad range of different containers (plastic or glass distributors, with or without locking in 250 ml, into 100 or 170 ml distributor with plastic locking, 15ml or 250ml bottle, 30ml dropper bottle or 250ml washing bottle).
CLEANOPTIC offers CLEANOPTIC wipe boxes containing 50 sheets. The CLEANOPTIC cleaning wipes enable to dry and to clean the optical fibers and faces, but also any element requiring a soft cleaning.
CLEANOPTIC offers polyester and cellulose wipes, very absorbent, resistant and non fluffy, available in 2 sizes: 10 x 10 cm and 23 x 23 cm, white to avoid the colour transfer on the connector during the contact between the wipe and alcohol.
Handy and easy to use, the cleaning card for optical connectors can be put into all the maintenance and tools kits.
A pre-cut plastic film covers the whole card to avoid any contamination risk.
All you have to do is to withdraw the plastic strip to reach the chosen cleaning zone, to place the connector perpendicularly to the card, to make a slight pressure and to slip along the cleaning zone. In one simple process, the optical fibre is clean!
The AirOptic air dusters from CLEANOPTIC are used to take the dust away or to dry the solvents (isopropyl alcohol and degreaser). Without any contact with the optical connections, they limit the risks of damage on the optical fibre. The AirOptic air dusters can be used in electronics, optoelectronics, optics and fibre optics.
AirOptic is a mono-position and non-inflammable dust remover and exempt from any impurities. It is available in 2 sizes: a large size of 650 ml and a small size of 175 ml, which perfectly fits into any intervention or maintenance kit.
Do not spray on the splicer and on the lenses, electrodes of your measurement devices.
For more information on our cleaning range : www.cleanoptic.net
